Description

The braking system „2-Stage Brake Control BCS 050“ controls the effective braking force of spring-operated, hydraulically released brakes. It allows a fast bypassing of the air gap between the brake pad and the brake disc, followed by a braking process with a reduced braking force for an adjustable period of time. After the stopping process the system provides the full force of the brake for a safe holding of the load.

The compact design makes the system fully retrofittable. It can be used independently of the hydraulic power unit in operation. Retrofitting is possible at any time. Even with existing braking systems, the braking process can be adjusted as required in order to avoid undesirable shock loads caused by the brake.

Working conditions

• Ambient temperature -10 °C / + 50 °C
• Air humidity < 90 %

Notes

• Fastening: 2 x M8 through hole for screw (L = 78 mm), 2 x M10 Floor screw connection (L = 15 mm)

Options

• Pressure monitoring memory via manometer (switch-on point monitoring)
• Mounting with brake on bracket (only possible with selected brake sizes)